Access Control readers

Advanced ID media reader (CMX3)

The CMX3 new generation reader supports the reading and writing to the latest technology ID media; in addition to ID cards and tags, smartphones are also supported (Android 5.1+, iPhone 7+, iOS 11+). The CMX3 reader can be used in Access Control systems to control all types of gates. This advanced reader is distinguished by modern and state-of-the-art design, and functionality supporting a variety of communication types and featuring RGB LED operation signalization. The reader's creative design is based on balanced flat design principles and is the work of Četrta pot's development team. 

ID media support:

• ISO-14443 and ISO-15693 compliant ID cards (Četrta pot DESFire cards recommended),
• smartphones as ID media: Android 5.1+, iPhone, iOS 11+,
• reading distance: up to 80 mm.

Integrated security standards:

• ID-media tokenization,
• eSE (embedded Secure Element) for encoding/decoding and security key storage,
• AES authentication and encoding.

Technical information:

• communication: RS485 serial communication,
• communication protocol: AIRg2, 4WX (other protocols optionally),
• dimensions: 90 × 90 × 15 mm,
• mounting: flush mounting on the wall (60 mm diameter electrical box), surface mounting,
• power: 12 V DC ±20%, 200 mA,
• operating temperature: -10 °C to +60 °C,
• operating relative humidity: 5–95%,
• IP rating: IP65.

Compliance with standards:

• compliant with 2014/53/EU Radio Equipment Directive,
• CE declaration of conformity.

Classical ID media reader (CM03)

The CMO3 ID card reader is suitable for Access Control use in all types of passages.

Supported ID media:

• 125 kHz Četrta pot RO and RW, 13,56 MHz Četrta pot DESFire EV2.

Technical data:

• dimensions: 80 × 80 × 25 mm,
• mounting: on the wall or in electrical box,
• power: 7–12 V DC / 150 mA,
• operation frequency: 125 kHz,
• reading distance: 10–15 cm,
• communication: RS485-4WX protocol, (optionally other protocols), Wiegand.

Combined proximity-keypad ID media reader (CM03SF)

ID card reader featuring also a keypad to enter PIN number is suitable for Access Control use in all types of passages of substantial security significance. Verification requires an ID medium (card) together with PIN security code.

Technical data:

• dimensions: 80 × 80 × 25 mm,
• mounting: on the wall or in electrical box,
• power: 7–12 V DC / 150 mA,
• operation frequency: 125 kHz and 13,56 MHz,
• reading distance (cards): 10–15 cm,
• FRR < 5 × 10 -3, FAR.

Combined proximity-fingerprint ID media reader (CM03FP)

The combined proximity-fingerprint reader is suitable for Access Control use in all types of passages by means of a fingerprint
and / or ID medium. Biometric sample is stored in the reader (locally or with centralized distribution).

Technical data:

• dimensions: 80 × 80 × 25 mm,
• mounting: on the wall or in electrical box,
• power: 7–12 V DC / 150 mA,
• operation frequency: 125 kHz and 13,56 MHz,
• fingerprint reader added,
• reading distance: contact for fingerprint identification, 10–15 cm for cards,
• FRR < 5 × 10 -3, FAR.

ID media for substantial reading distances (LR60)

The LR60 reader is suitable for Access Control applications where a larger ID media reading distance is required (barrier gates, vertical lift door).

Technical data:

• dimensions: 600 × 600 × 70 mm,
• mounting: on a post or a wall,
• power 230 V AC / 10 W,
• operation frequency: 125 kHz,
• card reading: HITAG1,2,S, EM H4102,
• reading distance: 40–70 cm,
• communication: RS485-4WX protocol.